Produktdetails
HEOSafe® Additional lock package for Carado, SunLight 2013 til model 2024 and for Etrusco, Glücksmobil till 2019
The security lock 1958 is completely integrated in the door coverage. Therefore, we don’t deliver only the security lock but also a jig for the drill holes, the part to put underneath the lock and the new door coverage so that it all fits perfectly.
ASSEMBLY INSTRUCTIONS
• Remove the small coverage which is on the screw of the inner door handle.
• Unbolt the screw at the inner door handle.
• Remove the door handle.
• Take away the door coverage.
• Take the jig which is enclosed in the delivery package, mark the drill holes and first drill with a smaller drill bit of 6 mm completely through and then continue with the 12 mm for the screws and the 20 mm bit for the grief stem from the outside. By preference use therefore a step drill bit.
• Take the grief stem and shorten it up to 34 / 35 mm.The length of the grief stem should not be longer then the small driver pins on the locking plate. It should flush with the driver pins. • Put the cylinder part on the outside.
• Remove the 2 screws of the security lock. Remove the basic plate.
• Now assemble the part with the drill holes and mount it underneath the basic plate. Use the screw 4 x M5 x 55 mm which are in the delivery package.
• Fix the lock part with the turning knob on the basic plate again.
• Push the new door coverage part in its place.
• Screw the door handle in its position again.
• Then put the lock plate on the inner frame in the correct position and fix it with the delivered screws (2 x 3,9 x 60 mm).
• Put the label on the inner coverage of the door.
Have a look at: HEOSystem 12656-1951
For any further information, we remain at your entire service: info@heosolution.de