HeoSafe Products
HEOSafe®Additional lock for the exterior lock with door handle type ZADI
Year of construction:
Article: 1740
Price: 69,00 €/piece
The lock HEOSafe®1740 is an additional security lock for the exterior lock with door handle type ZADI

Assembly without additional drilling or screwing

INSTRUCTIONS FOR USE

• Open the additional security lock with your key.
• Push the security lock upwards, now you can use the exterior lock with the door handle POS.
• You can secure the exterior lock again by pushing the additional lock downwards and lock.
• When the additional lock is closed with the key, the exterior lock can’t be unlocked nor can you move the handle.
• The additional can only be used from the outside. Always keep a key at hand! Risk of being shut out!

ASSEMBLY INSTRUCTIONS

• Open the exterior lock.
• Remove the cover at the inside of the door. Unscrew and remove the screws. Now remove the exterior lock completely.
• Assemble the basic plate (with seal) of the additional lock 1740 on to the exterior lock.
• Remove the adhesive tape carefully from the housing of the additional lock (spring!).
• Push the lock inside and shove the housing in to the guidance rails of the basic plate. Please take care that the rubber seal of the additional lock is not damaged.
• Put the exterior lock together with the additional lock in the drilled openings in the door and screw the complete lock again. Pay attention!:The screws should be tighten constant and easily.
• Check the smooth running of the additional lock in the guidance rails of the basic plate.
• To remove the lock please visit our website.
For any further information, we remain at your entire service: info@heosolution.de
Back